[maxxie (Max)]

Originally Posted by jurkob

Depends how lightweight/portable of a setup you need
...
- You would need to 3D print some parts (plate adapter and tripod spreader)

Thanks jurkob!
I mated RT90C to ZWO PE200 pier. Ready for Juwei :)
The black insert piece under three bolts and spreader are 3D printed. I modified it a little, holes are now 66mm all the way through. Ask me for STL file.
Bolts are from Bunnings, M6x30mm stainless steel. Center bolt M8x120mm, I had to file off a little from sides of the bolt head to fit it into the plate center hole.

Btw, if anyone wants unmodified insert, for shorter cup-head bolts, I can send it for free, just cover the postage.