|
If you have condensation, then two things - 1, how is the water getting inside? 2, a dehumidifier with a drainage hose plumbed to bleed outside the structure.
Insulation is all part of the thermal management of your gear. Allow it to get hot & nearly everyone blames the design of thier scope for its poor thermal performance instead of blaming themselves for letting their gear get hot in the first place. This starts with the colour of the paint on the outside of the obs followed by insulation and then temp regulation measures inside the obs. So if you haven't clad the structure yet, them sarking first before the cladding on the outside. On the inside, this is something that should have been considered from the very design stage, not backtracking. Coolroom panels would be the ultimate.
|