Quote:
Originally Posted by Leo.G
If they are only a brass or aluminium shim the best bet would be have any local engineering shop measure an old one and stamp/cut you some new ones if you have such a service available locally. Otherwise Tasco sales handle the parts and would either keep them in stock or get them in for you. Unless you have the punches and can measure them and cut your own.
|
They are made from very thin flexible plastic, maybe Teflon or some other shim material. I did find a material that appears to be the right thickness: 0.18mm. Although I can't find my callipers ATM, I may stamp them out.
I have some Rubylith film that appears to be the same consistency, may give that a go. Might see if the laser will cut it.