|
Continuation of the roof frame while dodge the rain.
Progress to date. Finished off the frame for the roof/dome support. As I only need to cover the corners, I decided to keep it simple and go for a flat roof design, using 17mm CD Plywood which will be waterproofed.
The decision to go with a flat roof was based more or less on the need to keep the structure within the 3m council rule and the over complicated carpentry to angle the corners. So, it was stick with the KISS principle.
Also assembled the base ring which will be used to mount the roller bearings.
All up, looking the way I have planned in my head.
Cheers
|