Quote:
Originally Posted by Drac0
Hi Chris,
Just letting you it is working with APT! Well, at least it connects - only tested the through power @12v so far and that works. Will test PWM & Panel (if I can figure out something there) soon. I'm guessing multiple switches will show up on the same screen as shown in your N.I.N.A. images when connected?
Another thing I will be testing is the variable power input. Going to try my DSLR @ 9v from as well as other settings available through the variable output from my PPBAv2 - I know you say 5v, but will it go to 3v if needed or won't it even start that low?
Cheers,
Mark
|
Hi Mark,
Thanks for confirming it works with APT.
Yes, if you're using multiple skyswitch devices the ASCOM driver will detect and display them. I've tested up to 10 switches although it can take up to 5 - 10 seconds for some bluetooth drivers and the OS to connect them after you press connect.
Unfortunately, 3 volts is not possible. The switching highside FET device spec is 4.75v minimum.
Chris