Quote:
Originally Posted by Startrek
Alex,
You probably already know , I’m always happy to assist folk regarding processing with Startools
Probably the most important thing with Startools is ensuring your Stacked data set is “Startools Compliant”.
Startools is all I’ve used for the past 6 years
Martin
|
Thanks Martin...I have spent some time since I first read your post going thru StarTools recommendations and must say there are areas that I can address.
The image here was not dithered for example which I usually do, the heater on the sensor was off also, flats probably were too old...in fact there were many things out of the ordinary that I can put down to rushing to get a result ...which I can accept because the last thing I expected given the layoff was to get any data at all
..I have not gone into all that took place merely to get power to the outlet for the scope but it involved batteries, inverter faulty leads and resurrection of a unused electrical system...I must say that to get the mount working etc was most of the game...
Anyways all is to be expected...it is almost like a New start..
I will get back up to speed with more time at the wheel.
Thanks for your help as your post prompted me to re read stuff and be reminded of many important matters...
alex