Quote:
Originally Posted by Leo.G
Thanks Martin!
Quick question, how easy/hard is it working with carbon fibre?
I've done a lot over the years with fibreglass (canoes not telescope tubes) but believe CF is stronger, any tips on not damaging an expensive tube?
Or just a Dremel, I have one of those?
|
Carbon fibre telescope tubes are only 2mm to 2.5mm thick so easy to drill through with a standard HSS drill bit
If fact when using the dremel to elongate a hole I had to be careful not to push too hard.
It’s really soft as butter at 2.5mm thick
Kayaks and Canoes I’d imaging would be thicker say 3 to 5mm thick in places
Hope that helps
Martin