Quote:
Originally Posted by oska
there is a setting 'Reverse Dec output after meridian flip' that, at least in phd2, can magically be off occasionally. Whenever I see what you're seeing and it's not cables, it's that config switch that is to blame. I know ekos has it's own guide module but the symptoms are the same.
|
Hi John,
Will have to check this out as it's not enabled by default in PHD2. They explain well how to test it, so will do that next chance I get - my guiding always seem much worse after a flip.
EDIT: Just noticed PHD2 has a "wizard" to test this under the Tools menu. That will make it easier to test & see if the reverse dec is needed..
Thanks,
Mark