Quote:
Originally Posted by DavidS
Thanks Dennis
I tonight loaded the TSX log file and was able to generate a PEC curve. I had only recorded 2 cycles so will now load that up to 5 as per PEMPro recommendations.
 |
That's great, well done.
Don't forget to then collect a log file with PEC enabled and Autoguider corrections turned ON, so you can then import that Log file into PEMPro which will then show you the corrected PE.
If the PE has doubled, then the Camera PA was wrong i.e. 180 degrees out of phase.
I think my MX+ was +2.4/-2.0 arcsecs before PE training and then +0.8/-0.6 arcsecs after PE training.
Cheers
Dennis