|
Ok so weird one…
I completely disassembled the camera to see if there was any evidence of damage to the board. Simon Lewis suggested purchasing a new board so i figured I didn’t have much to lose.
There was slight evidence of water damage but it had not been outside between having worked and then not working again. In any case I used some PCB cleaner on the board and connected just the board to the PC to see if it recognised it, which it did as it did before.
I then decided to reassemble it and before connecting to the PC, I connected it to the Asiair.
It began working straight away without any indication of a problem.
I have not since reconnected it to the PC in fear the same thing will happen. But it’s still working.
It still didn’t work when connected to the PC.
|