Thread: Correct Adapter for an Olympus OM-D Camera
View Single Post
  #3  
Old 13-03-2023, 05:18 PM
ausmensan's Avatar
ausmensan (Simon)
Galactic Explorer

ausmensan is offline 		 
Join Date: Dec 2007
Location: Perth, Australia
Posts: 50
Quote:
Originally Posted by By.Jove View Post
You scope has a standard 2" backend. In that you can put a M48 to micro-four-thirds adapter such as
https://fotodioxpro.com/products/t48-mft

There are many others that have a 2" tube with a 48mm thread at one end, and M4/3 bayonet at the other.

I have a GX85 and OM-5 body, and I do have the M4/3 to 2" adapter which I tried a few times - but i don't use it as I have an ASI533MC Pro which is a far better solution.

Note carefully: the adapter has the same M4/3 bayonet on the back to fit your camera body as the lens does. Not a Canon one.

Note 2. The ones with knurled ring will not fit inside a 2" focuser.

Thanks for the information, much appreciated, ended up buying one.
Reply With Quote