From the POD assembly video at
https://skyshedpod.com/skyshedpodass...v=e4b09f3f8402 the set of fixings is complete (apart from a damaged “L” seal and seal trims).
- 8x dome bolts
- 12x wall bolts
- 2x pivot bolts
- 15x guide bracket bolts
- 5x guide brackets (really only need 3 according to video)
- 3x quick release clamps and bolts for a DIY zenith table (this is an extra from the standard
https://skyshedpod.com/product/quick...v=e4b09f3f8402 )
- 2x lock knobs
- 2x door keys - locking mechanism works fine
- set of roller plates (still in place on dome)
- “L” seal screws and washers
The main “L” seal is damaged and there were no trim brackets that hold the seal. A replacement “L” seal is available from the manufacturer for $75US
https://skyshedpod.com/product/l-rub...v=e4b09f3f8402 and I have made up some trim brackets (although a photo on the website shows the seal installed without any brackets). In addition, the thick foam weather seals are old and probably need to be replaced. The manufacturer has these available for $70US
https://skyshedpod.com/product/black...v=e4b09f3f8402
With the replacement seals, the whole setup would be complete and as functional as a new one.