You scope has a standard 2" backend. In that you can put a M48 to micro-four-thirds adapter such as
https://fotodioxpro.com/products/t48-mft
There are many others that have a 2" tube with a 48mm thread at one end, and M4/3 bayonet at the other.
I have a GX85 and OM-5 body, and I do have the M4/3 to 2" adapter which I tried a few times - but i don't use it as I have an ASI533MC Pro which is a far better solution.
Note carefully: the adapter has the same M4/3 bayonet on the back to fit your camera body as the lens does. Not a Canon one.
Note 2. The ones with knurled ring will not fit inside a 2" focuser.