|
I have no idea if this is possible or feasible -
At 88mm the secondary is wider than some astro cameras, rather than go to a lot of expense, could you remake the tube and place the camera where the secondary sits. Buying a 2nd hand 10" for parts is easy and cheap.
Use a fine threaded over length bolt from the spider to the camera for a lot travel play. You just have to check the weight of your optic path with all the bits attached and see if it would be manageable on the spider.
Cable management to consider, but, you might need less bits and if you change camera's it should just be a matter of adjusting the spider camera holder.
|