Quote:
Originally Posted by mura_gadi
A router for option two is better, being able to control your plunge depth will help with beams, structs and supports if you're on floors/walls/ceilings.
The jigsaw for making tabletops, dob based, kick wheels* or any circle on a free board.
If you clamp scrap board against the exit face of the cut you won't get tears and splinters on the exit face, great tip for drilling, sawing, cutting etc, blessed be YT(at times).
Steve
*old school kinetic potters wheel... should be good for mirror work.
|
The irony is I checked my set up earlier and found the balance was way way off..I had moved/ exchanged finder / guide scope and added an Aisiair and I guess got caught up in many things and overlooked the most fundamental step...... balance it again..anyways the piers will now happen and so as with everything that goes wrong some good has come out of it...I ordered 250 mm pvc pipe "which is only 225mm"??? The shop said that but I only wanted 200 mm so it's my old friend over kill... so it is all go...
Thanks everyone I sure learnt a lot today and I do hope others benefited as well.
Alex