Thanks Philip,
I figure I’ll give it another week before I source Teflon sheet. I know others have used it and apparently it should only affect the longeavity of the shims. For the hypertune I believe I require 0.3mm increments so not sure how I’ll go with sourcing that.
Appreciate your help
Quote:
Originally Posted by iborg
Hi
What I have is probably no use, but, I have sheet teflon, ~1mm thick. Shims could be cut from it.
Delrin is significantly harder, so teflon is probably not a suitable replacement.
Let me know if you would like to try.
Philip
|