Quote:
|
Originally Posted by Dennis
My local Mitre 10 and Bunnings have a small range of metric (5, 6 & 8mm) and imperial (1/4 inch) socket head cap screws. Not SS and lengths vary from 15 to 25mm.
If you really get stuck, and know exactly what you require, PM me as I have a small selection of metric & imperial in my spares kit. I find most of the stuff I get from the US tends to be imperial.
Cheers
Dennis
|
Thanks guys for the offer but I have found out what the thread is and what i need:
From: Ken Dauzat [mailto:sales@kendauzat.net]
Sent: Tuesday, 10 October 2006 11:59 PM
To: David Hough
Subject: Re: ken I got the bar unpacked it.................
Hi David,
The screws are called 1/4" x 20 meaning... 1/4" diameter x 20 teeth per inch............. they are not metric treads. since the plate is 1/4" thickness I would use about 5/8" length and then perhaps a flat washer...the heads can be slotted, Philip, or allen...it really does matter as long as the treads match.
Ken...
