View Single Post
  #1  
Old 28-06-2022, 04:28 PM
JohnF (John)
Registered User

JohnF is offline
 
Join Date: Oct 2018
Location: Nimbin NSW Australia
Posts: 265
EQ5 mount with wooden Surveyors Tripod -- Needs some work

EQ5 plus old Surveyors wooden Tripod.

Hi have what I was told is a Skyview Pro EQ5 Mount, NON-GOTO. It may need stripping, and a repair, but does work.

Have slow motion knobs on Cables with it – new these cost me $30.
No counterweights will be with it, as I need these for another mount at the Moment – but you often get cheap Weight-lifters weights at Op-shops that would work.

It can have motors added, but don’t have any of these to fit it [My other one had Motors fitted].

Have a Old Surveyors Wooden Tripod to go with this mount. You would need to make an adaptor to fit it to the tripod – think this will be very easy if you access a lathe [may be at a Local Men’s Shed]. It was a planned project that I no longer need to do, as I purchased a HEQ5, and am saving for another more expensive mount.

Only $170--.

Last edited by JohnF; 11-07-2022 at 12:45 PM. Reason: add photos