|
Thanks JA.
1. Checked and re checked not the issue.
2. The power should be ok but later I will plug the brick into the genny...the 240 vlt comes from a 12 volt bank via an inverter and last night the genny was charging the batteries so they had plenty of power...
3.Tracking set on sidereal.
I have now placed the 80 mm on it and will try that out plus conect direct to the genny which will narrow down things. I am looking for another power supply box to determinecif it is the brick but it slews ok at 9 on both axis at once no complaints...and there is no blinking light which I think manifests if the mount needs more power.... I am obviously hoping it has fixed itself...if not no matter I will just move on to something else for the moment.
Thanks for your help.
Alex
|