View Single Post
  #28  
Old 27-05-2022, 03:30 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,879
I made the low profile adapter for 85 mm backfocus with FF-FR and Canon camera..
Tube is 3D printed some time ago "just in case" (dimensions were taken from standard Celestron eyepiece adapter), M42x1 thread was glued in place (originally came from ebay (M39 -> M42 ring adapter)), and M42-EOS adapter I had already. This should be good for test, the "real thing" (it will require some machining to adjust the length) is on its way.
Weather looks good for Sat evening..
Attached Thumbnails
Click for full-size image (c_36.jpg)
41.3 KB12 views
Click for full-size image (c_34.jpg)
50.7 KB14 views
Click for full-size image (c_37.jpg)
22.6 KB7 views

Last edited by bojan; 27-05-2022 at 03:51 PM.
Reply With Quote