Quote:
Originally Posted by mura_gadi
Is there a way to display/retrieve the boot sequence from the camera, that would contain a boot file for failed to load/detect errors on the BIOS/POST boot?
they may have failed after nearly five years, an indicator light is sometimes just part of the current, not a function is working per say...
|
My 6” scope is 5 years old
My 2600MC camera is only 18 months old ( these entered the market in late 2019 early 2020 )
The reason for the title of the post was that I prematurely thought the cause was the scope ( didn’t even think of the camera as it gets cleaned every 12 months and new desiccant fitted )
I’m going to clean the sensor and protective window today and fit a new set of desiccant tablets
Then next clear night going try my DSLR , if the issue repeats itself it’s definitely the scope
If the stars are ok then it was the 2600MC camera. I can then swap over my DSLR for the 2600MC and take some images with fingers crossed
Thanks
Boot files and Bios is over my head , I’ll handball that my 38 year old Son whose an IT manager if needed in the future