|
Thanks for the response Paul, a great reply. I seem to be coming from the other way... set the gain first then play with the brightness...
Just for comparison the settings I tried to have with the QC (and initally with the Toucam) was having gain as low as possible (sometimes a little was required up to 10-15% at times) with brightness set so that the overall image looked good, this usually ended up at around atleast 50-60% depending on the shutter speed/conditions etc... its just a matter of re-learning what to look for with the standard frames and how they will turnout once they are stacked+processed to give the final image.
|