[Nikolas (Nik)]

Hi guys

Not sure if it's the humidity in Melbourne but my camera has started to show condensation on the sensor I have verified it is on the sensor by careful observation. I have spare dessicant tablets that are quire old but were unused but they havent helped even after swapping them over I'm still getting condensation on the sensor, it only goes away at 8 degrees c and above I am also microwaving the original ones as instructed on the zwo website, still getting condensation. Gonna try a few more things like very slow cooling to see if that sorts it. In the meantime I've ordered some fresh dessicants and will replace them as soon as they arrive. Anyone got any tips? I can easily cool it to -5 as the ambient temp is still good enough to go that low but the condensation is unacceptable at the moment.