|
Hi Ken
I do have several connectors spare, both 2.1 and 2.5mm pin. I think you need 2.1mm.
The solder tags look to be in the correct orientation, judging by the shot of the bottom of the board. As is the the one in the photo from Chris.
The ones I have are 8.95mm wide, 10.94mm tall, at the front face and 14.35mm deep. At least that is what my cheap digital caliper tell me.
PM an address if you would like one posted. It would be faster to get something similar locally. There is a Jaycar in Geelong.
Have fun
Philip
|