Quote:
Originally Posted by Wilsil
Be sure to use the native drivers to have more data available.
The CFW is great, it's a big piece of kit what adds to the weight.
I had to change the focuser due to all the weight; over 2 kg in total.
Only yesterday it was struggling to get to the -10 C but ambient was still above 25 C at 9pm so that would make sense.
|
I'm replacing a moonlight focuser with the Esatto because of the weight of the new camera setup, the moonlight was struggling with the weight.
I found it sat at over 80% cooler power at -10c when the temp was around 20c, and I got occasional warnings from NINA about it. QHY tech support said it was expected as the CMOS sensor in this one is harder to cool than the CCD in the old QHY10 so I decided to go with -5c instead which has been no problem so far.