|
I use the QHY268M with NINA, no problems at all. Also works fine with the QHY485 and QHY10, all with the latest drivers. For a little while the QHY
SDK they shipped with NINA had to be replaced as it had some support issues with old and very new cameras, but its easy to swap SDK and the current version works with all my cameras.
The only comment I had regarding the 268M was that it struggles to cool compared to the much older QHY10 which can get to arctic low temps with ease. I had to increase my standard temp to -5c with the 268 to keep the current draw low and stable.
I also have the QHY OAG-M and CFW3 36mm filter wheel setup with ZWO filters.
I got the filters with the setup when I bought it all together, and although the filters are better than I expected (I believe they are the second gen ZWOs) there are bad halos with the Oiii filter. 36mm doesn't seem to cause any vignetting issues, at least no worse than the QHY10 with a 2 inch filter.
I think the full setup up from QHY is well worth it. All works together easily, and corrector spacing couldn't be easier with every adapter and spacer needed coming with it. NINA works out of the box no problem with the filter wheel + camera through the one USB cable. I just installed an Esatto focuser yesterday so now have the autofocus to configure.
|