Quote:
Originally Posted by xa-coupe
Thanks Adam.
I'm running a 12 AC power supply to a pegasus pocket micro ...which has given me an idea as I have a way to watch the voltage in real time.
I've got nothing I don't need running, just NINA, PHD2 EQMOD and the pegasus software.
I might leave the pegasus software up too and watch the voltage when it disconnects.
edit - 2 disconnects and the voltage and amp draw didn't flinch ... dammit.
|
Yes the Pegasus is also how I found out about my glitching problem. So that's ruled out for you.
And sorry to bang on about this, but have you set the correct baud rate?
Go into Device Manager, find the port you have connected the mount to (if you disconnect everything, plug the mount in only, and see which port is in use), then right click that port, go to Properties, and on the Port Settings tab, ensure the bits per second is 115200.
Martin mentions he switches, but maybe try using 115200 for now.
Lastly... well check for anti-virus applications
Turn them off and see if there's a conflict.
Short of that, maybe a complete reinstall of the application. Are you on the Nightlies by the way, or Release, or Beta? I'm using Version 1.10 HF4 BETA001 and it's solid.