cheers guys thanks. I'm not familar with other guiding software so i wouldnt know how to use them.
To find your IP address, click Start --> Run --> and type 'cmd' .
In DOS prompt, type 'ipconfig' . That will show you what your IP Address is.
To find out what ports you have available, that will depend on what software you have installed. Port range goes from 1 to 30000 . If you don't know what port are being used, i recommend using between 10000 - 30000 .
To find out what COM port you have that are available, that will depend on what hardware you have installed. I guess try each of the COM port until one connects
