View Single Post
  #13  
Old 01-11-2021, 09:33 PM
Drac0's Avatar
Drac0 (Mark)
Registered User

Drac0 is offline
 
Join Date: Feb 2020
Location: Nowra, NSW
Posts: 595
Quote:
Are you using ST4 guiding ( guide camera to mount ) ? If so , ditch it and use Ascom pulse guiding ( guide camera direct to laptop) enables you to guide on both sides of the meridian without issue, allows you to save a good Calibration for reuse over months and months , easier to analyse and diagnose PHD2 logs
Pulse guiding through ASCOM.
Quote:
Check Backlash and Stiction in both Dec and Ra , worms may need adjusting ?
Doing that tonight - RA guides fine, just DEC - I'm thinking this is the main issue.
Quote:
Ensure you achieve good calibration at Dec 0 ( Calibrate near celestial equator and close to north meridian)
Will redo the calibration & see once the skies clear again.
Quote:
Check balance in both Ra and Dec

How’s your Polar Alignment ? Under an arc minute ?
Both good.
Quote:
Run the Guide Assistant in PHD2 , it may pick up the problem
Will do. Thanks.
Reply With Quote