View Single Post
  #1  
Old 24-09-2021, 03:41 PM
UniPol
Registered User

UniPol is offline
 
Join Date: Jul 2006
Location: Lithgow, NSW
Posts: 1,685
Tak FSQ-106ED Extender-Q 1.6x

The FSQ-106ED series are considered by some to be astrographs and therefore not wholly suited for visual use. When I fitted a CAA (Camera Angle Adjuster), standard on the EDXx model's, the shorter back focus precluded the use of the 1.6x extender. The solution was found from Peter Tan's "Sun East Technology Co." in Hong Kong by arranging various Tak adaptors I already had, the only thing needed was a couple of M5x6 SS grub screws. This set up helps contain a fair portion of the adaptors within the CAA thus making it possible for the image to come to focus, focus travel being quite short on the FSQ-106ED. Part No.17 adaptor by the way is normally used with the QE 0.73x reducer so it is was handy to have for the extender. The FSQ is f5 (530mm) focal length in its standard form and f8 (850mm) with the extender.

The extender does not appear to degrade the already sharp contrasty views, in fact it is now ideally suited for planetary viewing. With a 5mm eyepiece it gives 170x which is excellent for Jupiter, Saturn and the Moon.
Attached Thumbnails
Click for full-size image (FSQ-106ED - EXT - 11.jpg)
189.5 KB42 views
Click for full-size image (FSQ-106ED - EXT - 51.jpg)
209.2 KB38 views
Click for full-size image (EDX3ext - 2.jpg)
75.5 KB26 views

Last edited by UniPol; 24-09-2021 at 04:05 PM.
Reply With Quote