Eric. Your red X & green X don't line up. They should. Your 2ndary is out. As Ving, (the 'Tweaker' said), 'adjust it'.
The reflection of the main is not in the centre. ie; not fully seen.
With it set like that, you'll find that the 'striations' will go from one side to the other when going from 'inside' focus to 'outside' focus..... & when 'in focus', the star image will not be a pinpoint.
They should all look centred thru the focuser tube BUT not when viewed down the top of the t'scope tube. This is the required '2ndary offset'.
HTH.
L.
ps. It's 'Andy's Shotglass'.
pps. Steve mentioned that it's diff to see if the 2ndary is in the centre of the focuser tube too. Make sure it is by placing a sheet of white paper inside the tube, opposite the focuser. Stand back a little, so that you can see a 'white circle' around the 2ndary. You may have to 'shim' the focuser to get it right.
pps. See >
http://www.fpi-protostar.com/collim.htm