|
Thanks Glen,
I pulled the side cover to have a look last night and it definitely the USB socket that's come off the board.
I'm going to strip it down and see if i can solder it back on.
Also is there and reason why I cant solder a cable to the board and then run the plug externally. A bit rough but its my imaging camera and I never use it for anything else except for the odd milky way.
I found this image so if the board is ok then its only 5 wires and earth the case??. The cabe is a male type A to male Mini B so it should be straight forward if the board is intact.........maybe.
No wonder they snap off, there's no reinforcement for the socket for rough people like me!!!
Cheers
Andy
|