|
Hi Pali,
These are the RA & Dec clutch levers for my Celestron CG5. Wondering if you might be able to print 2 of these in a color other than black? Note that the inside teeth pattern is not critical as they fit over a brass square, nor is the elongated cut out in image 3. But what would be handy would be to make the outer circular shape about 2-3mm less in diameter as the Dec lever rubs against the plastic motor housing as you can see in image 1.
What would you need to copy, perhaps I could send you one as they are the same as the levers on the tripod legs.
I wonder also if you could do the same for EQ8 Pro RA& Dec clutch levers?
Thanks
Peter
|