Thread: [WITHDRAWN] Moonlite Focuser Hardware
View Single Post
  #1  
Old 25-01-2021, 10:57 PM
Ryderscope's Avatar
Ryderscope (Rodney)
Registered User

Ryderscope is offline
 
Join Date: May 2006
Location: Glanmire, NSW
Posts: 2,347
Moonlite Focuser Hardware

I have the following Moonlite focusers and accessories that are left over from projects past and no longer needed so it is time to move them on. Prices listed below not including shipping costs. Pictures of all components are attached. Can package some of the items in job lots if required.

All items are in excellent condition. The 2.5" CSL focuser shows some marks on the draw tube from usage but does not affect function.

Note that different flanges to suit different OTAs are available from Moonlite in the US if the ones I have here do not suit. Flanges are secured by three hex keyed grub screws and a thumb screw and can be swapped out easily.

I have tested the stepper motor/controller to confirm that it is all working fine.

Full details of these items can be found on the Moonlite web site.


Moonlite CFL 2.5" large format Crayford Focuser - Refractor
------------------------------------------------------------------
Includes flange for Tak TSA120
Colour - black
Draw tube = 4.5" travel 68mm top
Price = $500


Moonlite CSL 2.5" Large Format Crayford Focuser - SCT/RC - Sold
------------------------------------------------------------------
Includes flange for GSO RC 10" OTA
Colour - Red
Draw tube = 1.5" travel 68mm top
Price = $500



Moonlite High Res Stepper Motor and Controller Kit - Sold
---------------------------------------------------------
Includes:
* High Res Stepper Motor
* Motor mounting bracket to suit CFL / CSL focuser
* Mini V2 Controller
* Temperature sensor
* Power cable
* 9 pin serial cable
* USB cable
Price = $460


Flange extenders - $60 each - SOLD
-------------------------------
1.25" flange extender
1.75" flange extender



Adapters - $60 each
----------------------
68mm -> Tak 72mm
68mm -> 2" compression ring (2 of)
68mm -> 1.25" compression ring (2 of)
68mm -> 48mm filter thread


Adapters - $85 each
-----------------------
68mm -> 48mm filter thread with locking ring
68mm -> 42mm T thread with locking ring
68mm -> Low position coma corrector adapter
68mm -> 48mm recessed T thread
Attached Thumbnails
Click for full-size image (IMG_1145.jpg)
177.0 KB232 views
Click for full-size image (IMG_1146.jpg)
176.6 KB195 views
Click for full-size image (IMG_1139.jpg)
177.6 KB217 views
Click for full-size image (IMG_1150.jpg)
201.0 KB168 views
Click for full-size image (IMG_1135.jpg)
144.0 KB158 views
Click for full-size image (IMG_1136.jpg)
143.8 KB141 views
Click for full-size image (IMG_1151.jpg)
175.3 KB257 views
Click for full-size image (IMG_1152.jpg)
169.3 KB225 views

Last edited by Ryderscope; 30-03-2021 at 09:20 AM.