|
I remounted my CPC925 on the Orion version of the AZEQ6. For AP use I would go with the EQ6-R instead. I used that combination with Voyager with pretty decent results, but you need to remember to park it on each session end so it starts from a known position, if you were going to automate it with as little manual intervention as possible.
I recently bought an Ioptron CEM70G which has the advantage of being able to seek it's own home position so in the event of a power outage or just forgetting to park it to a known position you can just tell it to find the home position. That is a sync event so the pointing is known after that and off you go again.
|