Quote:
Originally Posted by Saturnine
A fine image of the prom and the processing looks ok.
For mine, in Registax I normally use about 25 / 30% sharpening with the sliders. Seems to do a reasonable job sharpening the image and any more just adds more noise and artifacts.
Hope to get time tomorrow to have a look at Sol, has been several days without a chance to get the scope out, not withstanding the weather.
|
Thanks for this Jeff, this is very helpful as I haven'y had any real experience using Registax.
So is the 25-30% limit what you use generally across all sliders? I read slider 1 is typically for finer detail moving down to 6 for coarse detail. Also for the sliders does it matter what order you do them in, should it be 1-6? I took 500 images and set the cut off for best at 30% for the proms. I assume that would be based on seeing conditions? Should I also do a calibration image?
Sorry for all the questions.
Good luck for today.
Thanks again.
Peter