Quote:
Originally Posted by Ortovosh
I have an EQMOD cable from hand controller port to Macbook, and Zwo 120mini Cam straight to Macbook. This was same cables for DSLR, except DSLR was plugged in rather than Zwo Mini guide cam.
|
Sorry, I'm a bit confused here about what exactly your setup is.
Are you guiding with the use of the ZWO camera? If so, you'll need the ST4 cable to go from the ZWO cam into the autoguiding port on the HEQ5. When connecting to the camera and mount in PHD2 you need to select the ZWO camera then for the mount set it to "on camera".
You can guide without the ST4 cable, instead doing it through the EQMOD cable. You will need to set this up though, I'm not at my computer at the moment but if you let us know exactly what your setup is I can help out a bit later.