View Single Post
  #9  
Old 30-04-2020, 07:20 PM
raymo
Registered User

raymo is offline
 
Join Date: Sep 2011
Location: margaret river, western australia
Posts: 6,070
Just in case it is not clear enough. The eyepiece holder screws out of the plate it is fitted into, and this reveals a 42mm female thread which you screw the T ring into. You then attach the camera directly to the T ring, and the camera should then be firmly fixed to the scope. You then obviously focus by rotating the scope's focuser knob. As I said, it should come to focus about 10-12mm from fully racked in toward the scope. If this does not work, you need to post a photo of your camera attached to the scope. I'm assuming that you bought the scope new, thus eliminating the possibility that a previous owner has
has modded the scope in some way.
raymo
Reply With Quote