Quote:
Originally Posted by brisen
You should be able to unscrew the end off the focuser tube - the bit with the thumbscrews unscrews and should be the same thread as the reducer which will screw on. Turn it around to the opposite of how you have it in the photo.
|
That seems to have done the trick. I didn't even think about unscrewing the end of the focuser tube
Quote:
Originally Posted by brisen
Does the 2" to T2 then screw onto the end of the reducer?
|
Yep, it does
Quote:
Originally Posted by brisen
I assume also that you will need to get the spacing correct for the back focus distance which for Canon is 55mm to the sensor.
|
Yeah that's why I wasn't sure if the camera adapter is adequate for this purpose. Might need to do some experimenting...