View Single Post
  #8  
Old 31-12-2019, 12:13 AM
cpoc
Registered User

cpoc is offline
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 87
I think my camera is a big part of the issue, if I read correctly Nikon camera sensors tend to be some of the furthest set back of the camera brands.

I've just ordered some Volvo oil pan bolts as it turns out they can be bought in M7 at 100mm so I've ordered three (plus shipping it comes out to just under $50 but if they work they should be great).


The balance seemed fine while I was moving it about last night... holding everything in place while I carefully tried taking all the holding bolts out to put them back in again after slotting through the bracket was a bit nerve wracking... but once they were in it didn't seem all that different to normal (perhaps a slightly higher propensity to want to slowly lower at the opposite (ie viewing) end... but not overly fast and during normal operation it seemed fine.

Reply With Quote