|
What am I looking at here?
I just purchased a used QHY8-Pro off one of the members on here which is my first CCD camera. I've downloaded the latest drivers and connected to the camera in APT - it all seems very straight forward and I'm able to set the gain/offset, cool the camera etc.
However, on some of the shots I'm getting a weird artifact of some sorts and I'm hoping someone might be able to identify what the problem is? It's the first image - clearly the white area in the top right of the image...
As a follow-up in the second image - on the right side of the image there is a black area - initially I thought something was wrong with the chip, but having done some research apparently this is the overscan area which can be used to assist in calibration. Have I got this correct?
Any assistance would be much appreciated!
|