|
I'd say its likely its real. An F3 8 inch scope is collecting a lot of light fast, couple that with your high QE CMOS camera and you are getting deep fast.
I would expect to see things not normally shown with a setup like that.
Wonderful colours by the way. M16 often is boring.
Its like using Fluorite APOs, they pick up subtleties like this.
With the tilt the left hand side will be the right hand side of the camera looking at it from the back of the camera. The top left corner is the bottom right of the actual camera. Keep that in mind or you'll never correct the tilt.
The image is reversed top and bottom and left and right compared to the actual camera looking at it from the back of the camera.
I just relearned that little lesson setting up my Honders again after a hiatus.
Greg.
You probably only need a smallish packer. I use spark plug spacers. You can get a set from Supercheap Auto for a small amount.
Greg.
|