|
Dithering issue either side of Meridian
While imaging the other night taking 4 minutes subs on eastern side of the meridian my dithering was moving the mount randomly in RA and DEC as per usual ( PHD2) and the guiding recovered pretty good back to sub arc sec figures , but as soon as I crossed the meridian to the western side , did a manual flip and continued my subs the dithers were huge in DEC and hardly anything in RA ?? and the guiding never fully recovered
Would this have something to with my mount being slightly east heavy
Note: I use BYEOS to send the Dither command and settings didn’t change
Any advice on the above appreciated
|