View Single Post
  #1  
Old 19-04-2019, 03:39 AM
Ukastronomer (Jeremy)
Feel free to edit my imag

Ukastronomer is offline
 
Join Date: Jan 2019
Location: Llandysul, WALES, UK
Posts: 1,381
Not being able to find a focuser I wanted for my Esprit 120, that came off instantly

Not being able to find a focuser I wanted for my Esprit 120, that came off instantly and went on instantly I decided to make one. I did not want one that was permanently engaged with the scope. Also I refuse to spend £200+

I bought another Skywatcher electronic focuser, a piece of 3mm alloy bar and a 2.5” by 6” round bar.

I won't go into detail as I have taken photographs, what amazed me was the final luck when I attached the vacuum cleaner drive belt it fitted 100% and I had NOT measured at any stage for it to.

The knob attached to the motor has TWO grub screw holes, 3mm which is why the other holes are offset.

I am NOT an engineer as you can see but have enjoyed this. Took a day

The good thing is that the whole unit can easily be swapped over to the other side of the scopes focuser
Attached Thumbnails
Click for full-size image (DSCN0298.JPG)
88.4 KB44 views
Click for full-size image (DSCN0309.JPG)
79.3 KB48 views
Click for full-size image (Dscn0318.jpg)
128.9 KB51 views
Click for full-size image (DSCN0319.JPG)
80.7 KB49 views
Click for full-size image (Dscn0322.jpg)
90.1 KB51 views
Click for full-size image (Dscn0323.jpg)
137.6 KB50 views
Click for full-size image (DSCN0327.JPG)
90.0 KB62 views
Reply With Quote