[LostInSp_ce]

Thanks for the replies. I should have provided a little more info. The sub is a 5 minute guided exposure at 920mm (refractor, no reducer/flattener) on a NEQ6. Usually I drift align but this time I thought that I’d try something new and give SharpCap a go. I did check the latitude/azimuth bolts and they were definitely tight. I’m OCD about this as I’ve been burned too many times in the past. ��

I didn’t think about tilt, but maybe this might be the culprit. I did remove the reducer prior to imaging so maybe I left something loose in the imaging train.