[gregbradley]

[QUOTE=JA;1418355]Hi G,

There is a wifi adapter that you can use, presumably for the HEQ5 Pro, shown in the video operating an EQ6 and another mount. Ask the vendor to confirm 100%, but I'm reasonably sure it is compatible. 3rd video (V. Long)

Best
JA

Thanks JA. There's even an ad for it on the right hand side of this site.

Yes per the ad it is available on any mount that uses the Synscan hand controller. Looks to be an interesting accessory.

Originally Posted by Startrek

I can carry mine in and out of the house ( obviously without OTA ) and I’m nearly 60 and weigh 70kgs. I wouldn’t say it’s a super lightweight mount but its portable enough for me to move.
My laptop sits in a purpose built tub sitting sideways on an adjustable laptop table 3m away from the mount and is cabled via a pvc flat duct on the ground with both 12v dc power for mount and dew heaters , USB cables and camera cable etc I use the power point in my pool filter enclosure ( adjacent to my laptop ) to power the 12v powertech supply. I have an old adjustable drum kit stool I use sit at the laptop and run my sessions
You could set it up with wifi with the right wifi adapters , software etc but I haven’t gone down that path yet , I’m a bit old school , good ol reliable cable connections
Photo attached
Cheers

I went to Bintel today and had a look at one. Its beefy. It had what looked like an 80 or 100mm refractor on top of it but it was quite beefy to pick up.

I think for what I want to do it makes a lot of sense and is actually cheaper than some of these DLSR tracker mounts.

Originally Posted by xelasnave

Hi Greg
I have an old but decent eq6 but with my leg issues it was just a bit too much to handle (although maybe not so much now happily).

So I wanted a transportable set up to take North.
And so I purchased a HEQ5 and a espirt 80mm refractor.
Firstly when I get polar alignment perfect it can manage long exposures teasonably well..I have still yet to train it I just keep forgeting...only gear drive but so far it has not been an issue.

Later I noticed folk were putting what I considered huge loads on their HEQ5 mounts so I decided to try my 8 inch f5 reflector and so far all I can say it manages it much much better than I would have expected...So far I have not pulled this mount down for a tidy up..maybe paint chips..things that should not be there but are there..in other words I think it can be made even better.
Folk complain the legs are bot too good but really they are not bad at all. ..I do find the adjustment during polar alignment could be nicer with something better to grab..but thats not the end of the world.
I still use the box it came in for transport (cut in half with bailing twine to keep it closed☺) although the box for the legs got wet and needs a fix☺

For the money I think they are a great mount and I bet with a blue print and maybe a belt drive would be hard to beat.

Bottom line I am sure it will do all you want and you can even get away with something quiet big on it in a pinch.

There was a cover that did not seat properly but that was the only thing wrong and I have not botheted about it...although ot really should be fixed.

Good luck
Alex

It does seem amazing value. About 15 years ago I bought a Vixen Sphinx for AUD$2650 and it was junk. So less than half that price and it autoguides and does goto is wifi compatible, does PEC.

Originally Posted by Merlin66

Don't know about iPhones....

If find the HEQ5pro has a working capacity of more like 10Kg

I used CdC, EQmod Firecapture (for the electronic finder - gives a jpg for plate solving), AA7,and PHD2 for guiding. Now use that set up on the NEQ6pro in the observatory.