|
Thanks John. There is only one Industrial Plastics Supplier in Ballarat so I will go annoy them.
All you need David are 2 more of the bolts used at the bottom and chuck the big ones. Put the new ones in the top.
Make sure the plastic spacers step down as they come out. Place a washer on the outer end on the bottom spacer so the spring won't fall off. I placed a diagram in here somewhere a long time ago but now I can't find it so I have done another one:
EDIT: If you are one of those people in the habit of only using one spring you will not have to purchase any new bolts. Just use the bottom one from the side you dont use.
Last edited by ballaratdragons; 21-03-2005 at 06:55 PM.
|