Quote:
Originally Posted by Paul Haese
Brian, you should be able to get the collimation very close with the Tak scope. Make sure you check your focuser to secondary spot first with the laser. Good to hear you have nearly got it sorted though.
|
Hi Paul
Thanks. I have added a tilt plate between the extension tube and the focuser and tested it with the laser before I attacked the collimation yesterday. It was out and I have adjusted the tilt plate to get it in the centre but didn't think to test it again after I have been collimating. Hoping to drag it out tonight and get setup since it is supposed to be clear. I will use the laser again to see if it is still centred and adjust again in case it has moved.
Brian