View Single Post
  #1  
Old 20-10-2018, 01:46 PM
Bart's Avatar
Bart
Don't have a cow, Man!

Bart is offline
 
Join Date: Apr 2013
Location: Adelaide, South Australia
Posts: 1,117
Colour NGC104_ now with repro.

Finally got some colour for my NGC104 image, with NGC121 getting a look in as well. Two globs in two galaxies! Not very much data or not as much as I wanted although for now it will have to do. Still struggling with focus, will try to get out under the moon and nail the Temp Compensation and see how that goes.

Details


Telescope: William Optics FLT132

Guide Scope: QHY OAG

Camera: QHY9 Mono @ -20c

Filter Wheel: QHY 7 position Ultra Slim

Filters: QHY 36mm unmounted L R G B HA OIII SII

Guide Camera: QHY5L-II

Mount: AZ-EQ6

Mount Control: EQASCOM

Focusing: SharpSky Pro and Sequence Generator Pro 3 (automated)

Bahtinov Mask: No

Capture Software: Sequence Generator Pro 3

Guiding Software: PHD2

Calibration and Stacking Software: PixInsight

Processing Software: PixInsight

Number and Type of Data Frames: L= 19X300 sec, L =7X120 sec, L= 14x30 sec, R= 10x180 sec, G= 10x180 sec, B= 10x180 sec

Ha= x , SII= x , OIII= x .

Binning: 1x1

Total Image Time: 206 minutes

Location: Lockleys Observatory B, Tanunda, Sth Australia

Light Box by Exfso


Full Res

http://www.pbase.com/image/168197638


Reprocessed image can be found here. Thoughts appreciated and thank you to Mike and Trish and Paul Haese for there input.


http://www.pbase.com/grahammeyer/image/168299434
Attached Thumbnails
Click for full-size image (NGC104_LRGB_Web.jpg)
56.5 KB123 views
Click for full-size image (NGC104_LRGB_Rework_Web_001.jpg)
57.6 KB20 views

Last edited by Bart; 26-10-2018 at 09:21 PM.
Reply With Quote