Thread: Coupler problems for Focuser Automation
View Single Post
  #7  
Old 19-10-2018, 01:10 PM
AndrewJ
Watch me post!

AndrewJ is offline 		 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,905
Gday Andrew


4.8mm is close as dammit 3/16", so if necessary, get a 3/16" coupling, then drill one side out to 6mm.
or
https://www.amazon.com/Stainless-Ste.../dp/B012DV70YC


Andrew
Ed

just noted the shipping cost ( but there are other vendors )

Last edited by AndrewJ; 19-10-2018 at 01:22 PM.
Reply With Quote